Language Translator

U.S. CNG Dispenser


Built specifically for the U.S. Market, Compac’s High Flow & Ultra High Flow CNG Dispensers are suitable for a variety of refuelling applications.

  • No Calibration Drift – The dispenser automatically resets the zero point
  • Designed to Last – Frame and all dispenser components are stainless steel.  Flameproof enclosure is waterproof and circuit-boards are coated to protect electronics.
  • Easily Serviced – Valves are easy to access and can be serviced without removing pipework
  • No Free Gas – Highest possible accuracy.  True error checking between meter and dispenser electronics prevents dispensing un-metered gas
  • Safe Filling – Designed and approved to be installed in hazardous zones and won’t overpressurise cylinders


Compac CNG dispensers can also be individually tailored to suit your needs:

  • Individual settings for dual hoses for temperature compensation, flow rate and fill pressure variables
  • Units of measure to suit market requirements
  • Hose assembly to suit market requirements
  • Personalised decals dispensers with your decals
  • Protocol available in Compac, Gilbarco U.S. or IFSF
  • Other requests can be discussed

Compac U.S. CNG dispensers are available in the following configurations: 

Specifications   High Flow Model     Ultra High Flow Model   
Flow rate Up to 1-60kg/min* Up to 1-100kg/min*
Line options 1,2,3 lines 1,2,3 lines
Single or dual hose Yes Yes
High flow hose options NGV2 Type 1 - Oasis or OPW (up to 60kg/min)
NGV1 Type 1 - Oasis or OPW (up to 50kg/min)
NGV2 Type 1 - Oasis or OPW (up to 100kg/min)
NGV1 Type 1 - Oasis or OPW (up to 80kg/min)
Temperature compensated refuelling 3600 PSI or 3000 PSI at 70°F 3600 PSI or 3000 PSI at 70°F
Control Air actuated ball valve Air actuated ball valve
Construction Full Stainless Steel with Sealed Display Cabinet Full Stainless Steel with Sealed Display Cabinet
Power 110VAC 60Hz ± 10% 110VAC 60Hz ± 10%
Ambient rated operating temperature -40°F to +131°F (-40°C to +55°C) -40°F to +131°F (-40°C to +55°C)
Venting arrangement Venting to top Venting to top
Relief valves Venting to top Venting to top

 * Flow rate dependent on upstream and downstream conditions, hose selection and maximum inlet pressure.


Fill in the form below for more information on this product.

NGV Products*
Are you a machine? If not please enter nothing in here:

Nearest Location

I have read the privacy policy*

Copyright © 2018 - 2022 Compac Industries. All rights reserved. Privacy | Sitemap | Powered by MOCA